- Workplace: G8, Khu B, Đường CN5, Khu xưởng Kizuna 3, KCN Tân Kim mở rộng, Cần Giuộc, Tỉnh Long An
- Working form: Fixed time (Administrative)
- Job description:
Machining method
Create a program on a personal computer, send data to the automatic drill (α-D21LiB) and make the necessary adjustments. Before actual machining, the program content and drawings are checked again to confirm that there are no errors. This will prevent more than half of the mistakes caused by carelessness. Tolerance is 0.01 for aluminum and 0.03 for plastic. In case of plating, the machining allowance tolerance when plating will be calculated and then programmed.
How to proceed
Because there are many drawings with tight tolerances, there will be staff checking parameters for the processing stages to create a highly accurate product. Even if the operation is wrong, the damage can be reduced to a minimum.
Installed during machining
During the product machining process, until the blade stops moving for effective machining programming, you can proceed to program the next product, chamfering the edges or removing burrs so as not to waste time.
Target time and machining time
Each drawing has a target time set, everyone will proceed so that the machining will be completed within that time period. However, in case the processing time is needed to be greater than that target processing time, a meeting will be held to think about the cause of the time loss. By doing so, it will make the company grow and the outsourcing environment will also be tightened.
